View APT18M100S_1211414.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

APT18M100B APT18M100S
1000V, 18A, 0.70 Max
N-Channel MOSFET
Power MOS 8TM is a high speed, high voltage N-channel switch-mode power MOSFET. A proprietary planar stripe design yields excellent reliability and manufacturability. Low switching loss is achieved with low input capacitance and ultra low Crss "Miller" capacitance. The intrinsic gate resistance and capacitance of the poly-silicon gate structure help control slew rates during switching, resulting in low EMI and reliable paralleling, even when switching at very high frequency. Reliability in flyback, boost, forward, and other circuits is enhanced by the high avalanche energy capability.
TO
-2
47
D3PAK
APT18M100B Single die MOSFET
APT18M100S
D
G S
FEATURES
* Fast switching with low EMI/RFI * Low RDS(on) * Ultra low Crss for improved noise immunity * Low gate charge * Avalanche energy rated * RoHS compliant
TYPICAL APPLICATIONS
* PFC and other boost converter * Buck converter * Two switch forward (asymmetrical bridge) * Single switch forward * Flyback * Inverters
Absolute Maximum Ratings
Symbol ID IDM VGS EAS IAR Parameter Continuous Drain Current @ TC = 25C Continuous Drain Current @ TC = 100C Pulsed Drain Current Gate-Source Voltage Single Pulse Avalanche Energy 2 Avalanche Current, Repetitive or Non-Repetitive
1
Ratings 18 12 68 30 1070 9
Unit
A
V mJ A
Thermal and Mechanical Characteristics
Symbol PD RJC RCS TJ,TSTG TL WT Characteristic Total Power Dissipation @ TC = 25C Junction to Case Thermal Resistance Case to Sink Thermal Resistance, Flat, Greased Surface Operating and Storage Junction Temperature Range Soldering Temperature for 10 Seconds (1.6mm from case) Package Weight 0.22 6.2 10 1.1 -55 0.11 150 300 Min Typ Max 625 0.20 Unit W C/W
C oz g in*lbf N*m
10-2006 050-8091 Rev A
Torque
Mounting Torque ( TO-247 Package), 6-32 or M3 screw
Microsemi Website - http://www.microsemi.com
Static Characteristics
Symbol
VBR(DSS) VBR(DSS)/TJ RDS(on) VGS(th) VGS(th)/TJ IDSS IGSS
TJ = 25C unless otherwise specified
Test Conditions
VGS = 0V, ID = 250A Reference to 25C, ID = 250A VGS = 10V, ID = 9A VGS = VDS, ID = 1mA VDS = 1000V VGS = 0V TJ = 25C TJ = 125C
APT18M100B_S
Typ 1.15 0.60 4 -10 Max Unit V V/C V mV/C A nA
Parameter
Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Drain-Source On Resistance
3
Min 1000
Gate-Source Threshold Voltage Threshold Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate-Source Leakage Current
3
0.70 5 100 500 100
VGS = 30V
Dynamic Characteristics
Symbol
gfs Ciss Crss Coss Co(cr) Co(er) Qg Qgs Qgd td(on) tr td(off) tf
4
TJ = 25C unless otherwise specified
Test Conditions
VDS = 50V, ID = 9A VGS = 0V, VDS = 25V f = 1MHz
Parameter
Forward Transconductance Input Capacitance Reverse Transfer Capacitance Output Capacitance Effective Output Capacitance, Charge Related
Min
Typ 19 4845 65 405 165
Max
Unit S
pF
5
VGS = 0V, VDS = 0V to 667V
Effective Output Capacitance, Energy Related Total Gate Charge Gate-Source Charge Gate-Drain Charge Turn-On Delay Time Current Rise Time Turn-Off Delay Time Current Fall Time
VGS = 0 to 10V, ID = 9A, VDS = 500V Resistive Switching VDD = 667V, ID = 9A RG = 4.7 6 , VGG = 15V
85 150 26 70 22 20 75 19
nC
ns
Source-Drain Diode Characteristics
Symbol
IS ISM VSD trr Qrr dv/dt
Parameter
Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) 1 Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Peak Recovery dv/dt
Test Conditions
MOSFET symbol showing the integral reverse p-n junction diode (body diode)
Min
D
Typ
Max 18
Unit A
G S
68 1.0 1080 24 10 V ns C V/ns
ISD = 9A, TJ = 25C, VGS = 0V ISD = 9A 3 diSD/dt = 100A/s, TJ = 25C ISD 9A, di/dt 1000A/s, VDD = 800V, TJ = 125C
1 Repetitive Rating: Pulse width and case temperature limited by maximum junction temperature. 2 Starting at TJ = 25C, L = 26.42mH, RG = 4.7, IAS = 9A. 3 Pulse test: Pulse Width < 380s, duty cycle < 2%. 4 Co(cr) is defined as a fixed capacitance with the same stored charge as COSS with VDS = 67% of V(BR)DSS. 5 Co(er) is defined as a fixed capacitance with the same stored energy as COSS with VDS = 67% of V(BR)DSS. To calculate Co(er) for any value of VDS less than V(BR)DSS, use this equation: Co(er) = -1.41E-8/VDS^2 + 2.48E-9/VDS + 4.81E-11. 6 RG is external gate resistance, not including internal gate resistance or gate driver impedance. (MIC4452)
Microsemi reserves the right to change, without notice, the specifications and information contained herein.
050-8091
Rev A
10-2006
60 50 ID, DRAIN CURRENT (A) 40 30
V
GS
= 10V
20
APT18M100B_S
T = 125C
J
V
GS
= 6, 7, 8 & 9V
ID, DRIAN CURRENT (A)
TJ = -55C
15
10
5V
TJ = 25C
20 10 0
5
4.5V
TJ = 125C
TJ = 150C
30 25 20 15 10 5 0 VDS(ON), DRAIN-TO-SOURCE VOLTAGE (V) Figure 1, Output Characteristics
NORMALIZED TO VGS = 10V @ 9A
0
0
30 25 20 15 10 5 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 2, Output Characteristics
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
3.0 2.5 2.0 1.5 1.0 0.5
60 50 ID, DRAIN CURRENT (A) 40 30 20 10 0
VDS> ID(ON) x RDS(ON) MAX. 250SEC. PULSE TEST @ <0.5 % DUTY CYCLE
TJ = -55C TJ = 25C TJ = 125C
0 25 50 75 100 125 150 0 -55 -25 TJ, JUNCTION TEMPERATURE (C) Figure 3, RDS(ON) vs Junction Temperature 25
0
8 7 6 5 4 3 2 1 VGS, GATE-TO-SOURCE VOLTAGE (V) Figure 4, Transfer Characteristics
Ciss
10,000
gfs, TRANSCONDUCTANCE
20
TJ = -55C TJ = 25C
C, CAPACITANCE (pF)
1,000
15
TJ = 125C
10
100
Coss
5
Crss
0
0
10 8 6 4 ID, DRAIN CURRENT (A) Figure 5, Gain vs Drain Current 2
ID = 9A
12
1000 800 600 400 200 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 6, Capacitance vs Drain-to-Source Voltage 0 60 ISD, REVERSE DRAIN CURRENT (A) 50 40 30 20 10 0
TJ = 25C
TJ = 150C
10
16 VGS, GATE-TO-SOURCE VOLTAGE (V) 14 12 10 8 6 4 2
VDS = 240V
VDS = 600V
VDS = 960V
050-8091
20 40 60 80 100 120 140 160 180 200 Qg, TOTAL GATE CHARGE (nC) Figure 7, Gate Charge vs Gate-to-Source Voltage 0
0
1.2 1.0 0.8 0.6 0.4 0.2 VSD, SOURCE-TO-DRAIN VOLTAGE (V) Figure 8, Reverse Drain Current vs Source-to-Drain Voltage 0
Rev A
10-2006
100
I
100
I
APT18M100B_S
DM
DM
ID, DRAIN CURRENT (A)
ID, DRAIN CURRENT (A)
10
13s
100s
10
Rds(on)
13s 100s
1
1ms
Rds(on)
10ms
100ms
1
TJ = 150C TC = 25C
1ms 10ms 100ms DC line
0.1
TJ = 125C TC = 75C
DC line
1
10 100 1000 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 9, Forward Safe Operating Area
0.1
Scaling for Different Case & Junction Temperatures: ID = ID(T = 25C)*(TJ - TC)/125
C
10 100 1000 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 10, Maximum Forward Safe Operating Area
1
TJ (C)
0.0167 Dissipated Power (Watts) 0.00457 0.0176 0.270 0.0688
TC (C)
0.114 ZEXT are the external thermal impedances: Case to sink, sink to ambient, etc. Set to zero when modeling only the case to junction.
Figure 11, Transient Thermal Impedance Model 0.25 Z JC, THERMAL IMPEDANCE (C/W)
0.20
D = 0.9 0.7 0.5 0.3
Note:
0.15
PDM
0.10
ZEXT
t1 t2
0.05
0.1 0.05
SINGLE PULSE
Duty Factor D = 1/t2 Peak TJ = PDM x ZJC + TC
t1 = Pulse Duration
t
0
10-5
10-3 10-2 10-1 RECTANGULAR PULSE DURATION (seconds) Figure 12. Maximum Effective Transient Thermal Impedance Junction-to-Case vs Pulse Duration
10-4
1.0
TO-247 (B) Package Outline
e3 100% Sn Plated
15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244)
D3PAK Package Outline
Drain (Heat Sink)
4.98 (.196) 5.08 (.200) 1.47 (.058) 1.57 (.062) 15.95 (.628) 16.05(.632) 13.41 (.528) 13.51(.532)
4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 6.15 (.242) BSC
1.04 (.041) 1.15(.045)
Drain
20.80 (.819) 21.46 (.845) 3.50 (.138) 3.81 (.150)
Revised 4/18/95
13.79 (.543) 13.99(.551)
Revised 8/29/97
11.51 (.453) 11.61 (.457)
0.46 (.018) 0.56 (.022) {3 Plcs}
10-2006
4.50 (.177) Max. 0.40 (.016) 0.79 (.031)
2.87 (.113) 3.12 (.123) 1.65 (.065) 2.13 (.084)
19.81 (.780) 20.32 (.800)
0.020 (.001) 0.178 (.007) 2.67 (.105) 2.84 (.112)
1.27 (.050) 1.40 (.055) 1.98 (.078) 2.08 (.082) 5.45 (.215) BSC {2 Plcs.}
1.22 (.048) 1.32 (.052)
3.81 (.150) 4.06 (.160) (Base of Lead)
Rev A
1.01 (.040) 1.40 (.055)
Gate Drain Source
Heat Sink (Drain) and Leads are Plated
2.21 (.087) 2.59 (.102)
050-8091
5.45 (.215) BSC 2-Plcs.
Dimensions in Millimeters and (Inches)
Source Drain Gate Dimensions in Millimeters (Inches)
Microsemi's products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.

▲Up To Search▲

Price & Availability of APT18M100S

	To Download APT18M100S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .